All Categories
all-categories
Designed, developed and manufactured under strict quality standards, the M-Series meter features sophisticated, processor-based signal conversion with accuracies of ±0.20 percent. The wide selection of liner and electrode materials helps ensure maximum compatibility and minimum maintenance over a long operating period. M-Series-M2000.jpg
FEATURES
TFX-5000 ultrasonic flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid.
BENEFITS
FEATURES
TFX-5000 ultrasonic flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid.
BENEFITS
FEATURES
The battery powered versions are a complete flow measuring system providing a programmable display of rate, total or both powered by a “C” sized lithium battery. Impeller SDI Series Flow Sensor.jpg
The rugged design incorporates an impeller flow sensor and two temperature probes. One temperature probe is conveniently mounted directly in the flow sensor tee. The second temperature probe is placed on either the supply or the return line, depending on ease of installation for the application. These minimal connections help simplify installation and save time.
The main advantage of the Series 380 BTU meters is the cost savings over other systems offered on the market today. The integration of flow and temperature sensors provide a single solution for metering. With this system it will be possible to meter energy where it has not been cost effective before.
Commissioning of this meter can be completed in the field via a computer connection. Setup includes energy measurement units, measurement method, communication protocol, pulse output control, fluid density, and specific heat parameters. Impeller 380 Series BTU System Meter_1.jpg
All sensors, except irrigation versions, are supplied with 20 feet of 2-conductor 20 AWG shielded UL type PTLC 221° F (105° C) cable. Metallic-Tee-Type-Flow-Sensors---Series-228.jpg
The unique impeller design is less prone to be fouled by waterborne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate. The signal can travel up to 2000 ft (610 m) between the flow sensor and the receiving unit without the need for amplification.
All sensors except irrigation versions are supplied with 20 ft (610 cm) of 2-conductor 20 AWG shielded UL type PTLC 221° F (105° C) cable and meet CE standards for noise immunity and susceptibility. Metallic-Tee-Type-Flow-Sensors---Series-250.jpg
Badger Meter flow sensors feature a closed, six-bladed impeller design, using a proprietary, non-magnetic sensing technology. The forward-swept impeller shape provides higher, more constant torque than four-bladed impeller designs, and is less prone to fouling by water-borne debris. The forward-curved shape, coupled with the absence of magnetic drag, provides improved operation and repeatability, even at lower flow rates. As the liquid flow turns the impeller, a low impedance signal is transmitted with a frequency proportional to the flow rate.
Sensors of similar type are interchangeable, so there is no need for recalibration after servicing or replacement. PVC-Tee-Industrial-Flow-Sensors---Series-228PV.jpg
Electronic metering provides information—such as rate of flow and reverse flow indication—and data not typically available through traditional, mechanical meters and registers. Electronic metering eliminates measurement errors due to sand, suspended particles and pressure fluctuations. Dynasonics U500w Ultrasonic Flow Meters.jpg
ModMAG® M2000 Electromagnetic Flow Meters
The Badger Meter M-Series M2000 is the result of years of research and field use of electromagnetic flow meter technology. Based on Faraday’s law of induction, these meters can measure almost any liquid, slurry or paste that has minimum electrical conductivity.Designed, developed and manufactured under strict quality standards, the M-Series meter features sophisticated, processor-based signal conversion with accuracies of ±0.20 percent. The wide selection of liner and electrode materials helps ensure maximum compatibility and minimum maintenance over a long operating period. M-Series-M2000.jpg
E-Series G2® Industrial Ultrasonic Flow Meters
The next generation E-Series G2® Ultrasonic meter uses solid-state technology in a compact, tamper protected, weatherproof and UV-resistant housing, suitable for residential applications. Electronic metering provides information—such as rate of flow and status and alarm indication—and data not typically available through traditional, mechanical meters and registers. Electronic metering minimizes measurement errors due to sand, suspended particles and pressure fluctuations. E-Series G2 Ultrasonic Flow Meters.jpg Recordall® Industrial Disc Series Meters
The Recordall Disc Series meters meet or exceed the most recent revision of AWWA Standard C700 and are available in a lead-free bronze alloy. The meters comply with the lead-free provisions of the Safe Drinking Water Act, are certified to NSF/ANSI Standards 61 and 372 (Trade Designations: MLP-LL, M25-LL, M35-LL, M55-LL, M70-LL, M120-LL and M170LL) and carry the NSF-61 mark on the housing. All components of the lead-free bronze alloy meter (housing, measuring element, seals, and so on) comprise the certified system. Recordall Industrial Disc Series Meters.jpg Recordall® Industrial Turbo Series Meters
Recordall Turbo Series meters meet or exceed the most recent revision of AWWA Standard C701 Class II Standards and are available in a lead-free bronze alloy for sizes 1-1/2" through 10" and cast iron for 12" meters. Turbo Series meters comply with the lead-free provisions of the Safe Drinking Water Act. Sizes 1-1/2" through 10" meters are also certified to NSF/ANSI Standards 61 and 372 (Trade Designation: Turbo Series LL-NS) and carry the NSF-61 mark on the housing. All components of the lead-free alloy meter (housing, measuring element, seals and so on) comprise the certified system. Recordall Industrial Turbo Series Meters.jpg Dynasonics® TFX-500w Ultrasonic Clamp-on Flow Meters
The TFX-500w transit time ultrasonic flow meter measures volumetric flow of clean water in pipes 10 in. or smaller. By clamping on the outside of the pipe, the ultrasonic meter installs without cutting or tapping the pipe.FEATURES
- Clamp-on, non-invasive flow meter
- Bidirectional flow measurement system
- Measures flow rate, total and velocity of water flow
- Set up the meter through keypad interface or with SoloCUE® Flow Device Manager software
- Compact enclosure uses large, easy-to-read graphical display
- Modbus RTU or BACnet MS/TP over RS485 and BEACON®/AquaCUE® connectivity
- Installs without cutting into the pipe
- Eliminates the costs of inline flanges and pipe fittings
- No moving parts to maintain
- No pressure head loss
Dynasonics® TFX-5000 Ultrasonic Clamp-on Energy Meters
The TFX-5000 transit time meter measures volumetric and energy flow rates in clean liquids as well as those with small amounts of suspended solids or aeration, such as surface water or sewage.TFX-5000 ultrasonic flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid.
BENEFITS
- Reduced installation time and cost
- Non-invasive measurement
- Continued operation during installation—no need to shut down the process
- No pressure head loss
- No moving parts to maintain or replace
FEATURES
- Non-invasive clamp-on ultrasonic transit time flow meter
- Bidirectional, full pipe flow measurement
- Btu/heat energy metering option
- Data logging 8 GB with real time clock
- Set up through keypad interface and SoloCUE software
- Modbus RTU, BACnet MS/TP and Ethernet communications
Dynasonics® TFX-5000 Ultrasonic Clamp-on Flow Meters
The TFX-5000 transit time meter measures volumetric and energy flow rates in clean liquids as well as those with small amounts of suspended solids or aeration, such as surface water or sewage.TFX-5000 ultrasonic flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid.
BENEFITS
- Reduced installation time and cost
- Non-invasive measurement
- Continued operation during installation—no need to shut down the process
- No pressure head loss
- No moving parts to maintain or replace
FEATURES
- Non-invasive clamp-on ultrasonic transit time flow meter
- Bidirectional, full pipe flow measurement
- Data logging 8 GB with real time clock
- Set up through keypad interface and SoloCUE® software
- Connects to BEACON® AMA and AquaCUE® flow analytics
- Modbus RTU, BACnet MS/TP and Ethernet communications
Impeller FC-5000 BTU Monitor
(8) The Badger Meter® FC-5000 is a microprocessor-driven device designed for energy/BTU and flow monitoring. The FC-5000 BTU Monitor is compatible with the complete line of Badger Meter industrial flow meters and temperature sensors, creating a solution to monitor hydronic energy usage, flow rate and totals. Many years of experience in the industrial market has allowed Badger Meter to incorporate features indispensable in control operations. Impeller FC-5000 BTU Monitor.jpg Impeller SDI Series Flow Sensor
The SDI Series flow sensor offers unparalleled performance for liquid flow measurement in closed pipe systems in an easy-to-install economical package. Impeller sensors offer a quick response to changes in flow rate and are well suited to flow control and batch type applications in addition to flow monitoring. The new four-bladed impeller design is rugged, non-fouling and does not require custom calibration.The battery powered versions are a complete flow measuring system providing a programmable display of rate, total or both powered by a “C” sized lithium battery. Impeller SDI Series Flow Sensor.jpg
Impeller 380 Series BTU System Meter
(5) The Series 380 BTU Systems provide a low cost system for metering cold or hot systems. The 380CS/HS can accurately measure flow and temperature differential to compute energy. Using either BACnet or Modbus RS-485 communications protocols or a scaled pulse output, the BTU Meter can interface with many existing control systems.The rugged design incorporates an impeller flow sensor and two temperature probes. One temperature probe is conveniently mounted directly in the flow sensor tee. The second temperature probe is placed on either the supply or the return line, depending on ease of installation for the application. These minimal connections help simplify installation and save time.
The main advantage of the Series 380 BTU meters is the cost savings over other systems offered on the market today. The integration of flow and temperature sensors provide a single solution for metering. With this system it will be possible to meter energy where it has not been cost effective before.
Commissioning of this meter can be completed in the field via a computer connection. Setup includes energy measurement units, measurement method, communication protocol, pulse output control, fluid density, and specific heat parameters. Impeller 380 Series BTU System Meter_1.jpg
Impeller Metallic Tee Type Flow Sensors - Series 228
The Series 228 flow sensors from Badger Meter® feature a six-bladed impeller design with a proprietary non-magnetic sensing mechanism. The forward swept impeller shape provides higher, more consistent torque than four-bladed impeller designs and is less prone to be fouled by water-borne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability, even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate. The signal can travel up to 2000 feet between the flow sensor and the display unit without the need for amplification.All sensors, except irrigation versions, are supplied with 20 feet of 2-conductor 20 AWG shielded UL type PTLC 221° F (105° C) cable. Metallic-Tee-Type-Flow-Sensors---Series-228.jpg
Impeller Metallic Tee Type Flow Sensors - Series 250
The Series 250 flow sensor from Badger Meter® features a six-bladed impeller design with a proprietary non-magnetic sensing mechanism, mounted in a cast bronze housing, with female NPT threads.The unique impeller design is less prone to be fouled by waterborne debris. The forward curved shape coupled with the absence of magnetic drag provides improved operation and repeatability even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes. As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate. The signal can travel up to 2000 ft (610 m) between the flow sensor and the receiving unit without the need for amplification.
All sensors except irrigation versions are supplied with 20 ft (610 cm) of 2-conductor 20 AWG shielded UL type PTLC 221° F (105° C) cable and meet CE standards for noise immunity and susceptibility. Metallic-Tee-Type-Flow-Sensors---Series-250.jpg
Impeller PVC Tee Industrial Flow Sensors 228PV Series
Used in conjunction with any Badger Meter® flow monitor or transmitter, Badger Meter non-magnetic flow sensors provide an accurate reading of the rate of liquid flow and total accumulated flow. The available sensor models cover applications for a wide range of pipe sizes and pressure/temperature specifications. The flow sensors generate a frequency proportional to flow rate. An internal preamplifier allows the pulse signal to travel up to 2000 feet (610 meters) without further amplification. Power to operate the sensor is provided by the flow monitor. The impeller bearing assembly, shaft and O-rings are replaceable in the field.Badger Meter flow sensors feature a closed, six-bladed impeller design, using a proprietary, non-magnetic sensing technology. The forward-swept impeller shape provides higher, more constant torque than four-bladed impeller designs, and is less prone to fouling by water-borne debris. The forward-curved shape, coupled with the absence of magnetic drag, provides improved operation and repeatability, even at lower flow rates. As the liquid flow turns the impeller, a low impedance signal is transmitted with a frequency proportional to the flow rate.
Sensors of similar type are interchangeable, so there is no need for recalibration after servicing or replacement. PVC-Tee-Industrial-Flow-Sensors---Series-228PV.jpg
Dynasonics® U500w Ultrasonic Flow Meters
The Dynasonics® U500w Ultrasonic meter uses solid-state technology in a compact, totally encapsulated, weatherproof, and UV-resistant housing, suitable for residential and commercial applications.Electronic metering provides information—such as rate of flow and reverse flow indication—and data not typically available through traditional, mechanical meters and registers. Electronic metering eliminates measurement errors due to sand, suspended particles and pressure fluctuations. Dynasonics U500w Ultrasonic Flow Meters.jpg
Dynasonics® DTTL Transducers
(9) Transducers for very large pipes, typically 24 inch (600 mm) and larger, and for use with TFX Ultra transmitter which can be mounted up to 990 feet (300 m) away. DTTL-Transducers.jpg Dynasonics® DTTL Transducers
(9) Transducers for pipes 2 inch (50 mm) and larger and for use with TFX Ultra transmitter which can be mounted up to 990 feet (300 m) away. DTTN-Transducers.jpg 