Measuring very low flow rates, the RS-900w Polymer Ultrasonic Flow Sensor is well suited for mixed zone irrigation applications: drip, rotors and spray heads. The simple design makes the sensor installation straightforward and cost effective.
- Three sizes with NPT or BSP tapered threads
- Forward flow accuracy ± 2% of reading
- 200 psi (13.8 bar) pressure rating
- Submersible IP 68 with fully potted electronics
- No moving parts to wear
- NSF/ANSI/CAN 61 and 372 certified option
- Same two-wire power/pulse output as impeller flow sensors
- Forward and reverse flow flashing LED indicators
Unit of Measure
Specifications
Connection Size |
N/A 2 in. female taper threaded (BSP) |
Flow Range |
N/A 200 gpm757 L/min |
Fluid Temperature [Min] |
N/A 0 ºC32 ºF |
Fluid Temperature [Max] |
N/A 60 ºC140 ºF |
Ambient Temperature [Min] |
N/A 0 ºC32 ºF |
Ambient Temperature [Max] |
N/A 60 ºC140 ºF |
Pressure Rating |
N/A 13.8 bar200 psi |
Body Material |
N/A Glass filled nylon |
Housing Material |
N/A Polyphenylene oxide |
Supply voltage |
N/A 8V DC min; 28V DC max. |
Output Frequency |
N/A 0.5…200 Hz |
Output Pulse Width |
N/A 5 msec ±25%, 50% duty cycle above 100 Hz |
Accuracy |
N/A ± 2% of reading |
Industry Standards/Certifications |
N/A
NSF/ANSI/CAN 61 and 372 certified option CE EMC Directive 2014/30/EU IP 68 / NEMA 4X |
Application |
N/A
Managing water usage in irrigation requires reliable flow sensoring. The wider the flow range and more accurate the sensor, the easier it is to detect leaks and respond quickly. As a critical part of water management, the RS-900w flow sensor reads consistently and does not degrade over time due to wear and tear.
|
